PartsTable
Technical Data Sheet
PartsTable / MRO / C-1336
C-1336 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include color: BLACK, material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.375 INCHES MAXIMUM IN, body_height: 0.812 INCHES MAXIMUM IN, body_length: 0.875 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C-1336
NSN: 3110-00-112-5767
FSC: 3110
CAGE: 74465 — HOOF PRODUCTS CO (USA)
SPECIFICATIONS
colorBLACK
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.375 INCHES MAXIMUM IN
body_height0.812 INCHES MAXIMUM IN
body_length0.875 INCHES MAXIMUM IN
shade_sourceMANUFACTURER
bore_diameter0.1880 INCHES NOMINAL IN
alignment_typeRIGID
terminal_length1.750 INCHES MINIMUM IN
special_featuresFOR USE ON METAL,GLASS,EPOXY,AND PHENOLIC COATINGS WHERE MARKINGS ARE REQUIRED
features_providedHERMETICALLY SEALED CASE
NSN3110-00-112-5767
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C-1336 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.3440 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.1880 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.3440 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.1880 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
5108Interchangeable
interchangeable cross-reference
interchangeable
0900807Interchangeable
interchangeable cross-reference
interchangeable
103386Interchangeable
interchangeable cross-reference
interchangeable
240BInterchangeable
interchangeable cross-reference
interchangeable
NE241030BInterchangeable
interchangeable cross-reference
interchangeable
B241Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C-1336?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-1336?
C-1336 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace C-1336?
There are 17 known substitutes for C-1336: 5108, 0900807, 103386 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C-1336?
C-1336 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-1336

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026