PartsTable
Technical Data Sheet
Download PDF

C-12-20260 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C-12-20260: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.373 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN, overall_diameter: 0.547 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-930-0234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-12-20260
NSN: 5310-00-930-0234
FSC: 5310 — Nuts and Washers
CAGE: 88907 — BRUNSWICK CORP DBA MERCURY MARINE DIV MERCURY MARINE (USA)
SPECIFICATIONS
materialPAPER OVERALL
thickness0.062 INCHES NOMINAL IN
hole_diameter0.373 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
overall_diameter0.547 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classification23B-39 FSCM 96114 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-930-0234
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C-12-20260 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.547 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 23B-39 FSCM 96114 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: PAPER OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.373 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
•
THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.547 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION23B-39 FSCM 96114 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALPAPER OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.373 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
THICKNESS0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
12-20260Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy C-12-20260?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-12-20260?
C-12-20260 is a WASHER,FLAT.
What parts can replace C-12-20260?
There is 1 known substitute for C-12-20260: 12-20260. Substitute compatibility should be verified for your specific system.
What is the NSN for C-12-20260?
C-12-20260 is cataloged in the U.S. Government catalog under NSN 5310-00-930-0234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-12-20260

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.