PartsTable
Technical Data Sheet
Download PDF

C-112922 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C-112922: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, hole_diameter: 0.230 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.000 INCHES NOMINAL IN, aperture_width: 4.700 INCHES NOMINAL IN, overall_length: 11.000 INCHES NOMINAL IN, aperture_length: 9.700 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-468-3621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-112922
NSN: 5330-01-468-3621
FSC: 5330 — Packing and Gasket Materials
CAGE: 11384 — KOLLMORGEN CORP (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
hole_diameter0.230 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.000 INCHES NOMINAL IN
aperture_width4.700 INCHES NOMINAL IN
overall_length11.000 INCHES NOMINAL IN
aperture_length9.700 INCHES NOMINAL IN
hardness_rating50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
special_featuresBOLT HOLES ARE UNEVENLY SPACED
style_designatorNON-CIRCULAR
bolt_hole_quantity17
end_item_identification5895013846751; ANTENNA GROUP OE-215A/FSC-79 A
cross-sectional_thickness0.125 INCHES NOMINAL IN
NSN5330-01-468-3621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C-112922 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH: 0.650 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 4.700 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH0.650 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH11.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH6.000 INCHES NOMINAL IN
APERTURE WIDTH4.700 INCHES NOMINAL IN
APERTURE LENGTH9.700 INCHES NOMINAL IN
BOLT HOLE QUANTITY17
SUBSTITUTES & CROSS-REFERENCES 1
112922Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C-112922?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-112922?
C-112922 is a GASKET.
What parts can replace C-112922?
There is 1 known substitute for C-112922: 112922. Substitute compatibility should be verified for your specific system.
What is the NSN for C-112922?
C-112922 is cataloged in the U.S. Government catalog under NSN 5330-01-468-3621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-112922