C-101437 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

C-101437: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE INTERNALLY THREADED, special_features: CHAMFERED END HAS 2 FLATS 180 DEGREES APART; 0.125 IN. DEEP,1.000 IN.

LONG,1-8 NC THD BY 1.000 IN. DP IN, pin_overall_length: 3.795 INCHES MINIMUM AND 3.805 INCHES MAXIMUM IN, pin_overall_diameter: 2.5000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-250-0699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

C-101437

NSN: 5315-01-250-0699
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 3X894 — CONTROL FLOW, INC. DBA CONTROL FLOW INC (USA)

SPECIFICATIONS

material	COPPER ALLOY OVERALL
first_end_style	CHAMFERED
second_end_style	SQUARE INTERNALLY THREADED
special_features	CHAMFERED END HAS 2 FLATS 180 DEGREES APART; 0.125 IN. DEEP,1.000 IN. LONG,1-8 NC THD BY 1.000 IN. DP IN
pin_overall_length	3.795 INCHES MINIMUM AND 3.805 INCHES MAXIMUM IN
pin_overall_diameter	2.5000 INCHES NOMINAL IN
first_end_taper_angle	45.0 DEGREES NOMINAL
first_end_taper_length	0.125 INCHES NOMINAL IN
material_document_and_classification	QQ-C-502 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_end	NOT IDENTICAL
NSN	5315-01-250-0699

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN

•

FIRST END STYLE: CHAMFERED

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-502 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

PIN OVERALL DIAMETER: 2.5000 INCHES NOMINAL IN

•

PIN OVERALL LENGTH: 3.795 INCHES MINIMUM AND 3.805 INCHES MAXIMUM IN

•

SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.125 INCHES NOMINAL IN
FIRST END STYLE	CHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-502 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER	2.5000 INCHES NOMINAL IN
PIN OVERALL LENGTH	3.795 INCHES MINIMUM AND 3.805 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
SPECIAL FEATURES	CHAMFERED END HAS 2 FLATS 180 DEGREES APART; 0.125 IN. DEEP,1.000 IN. LONG,1-8 NC THD BY 1.000 IN. DP IN
SECOND END STYLE	SQUARE INTERNALLY THREADED
MATERIAL	COPPER ALLOY OVERALL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

N-100419-1 PIECE 20Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy C-101437?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is C-101437?

C-101437 is a PIN,STRAIGHT,HEADLESS.

What parts can replace C-101437?

There is 1 known substitute for C-101437: N-100419-1 PIECE 20. Substitute compatibility should be verified for your specific system.

What is the NSN for C-101437?

C-101437 is cataloged in the U.S. Government catalog under NSN 5315-01-250-0699. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

C-101437 — PIN,STRAIGHT,HEADLESS

Request a Quote — C-101437