PartsTable
Technical Data Sheet
Download PDF

BUWEPSDWG243031 5 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BUWEPSDWG243031 5: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 2.562 INCHES NOMINAL IN, material: STEEL COMP 1075 OVERALL, hole_diameter: 0.281 INCHES NOMINAL IN, overall_height: 0.406 INCHES NOMINAL IN, surface_treatment: PAINT OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-245-8668, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BUWEPSDWG243031 5
NSN: 5340-00-245-8668
NIINs: 002458668, 002458669
FSC: 5340 — Hardware, Commercial
CAGE: 05824 — AEROJET ROCKETDYNE INC (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length2.562 INCHES NOMINAL IN
materialSTEEL COMP 1075 OVERALL
hole_diameter0.281 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
surface_treatmentPAINT OVERALL
loop_opening_width1.328 INCHES NOMINAL IN
material_thickness0.042 INCHES NOMINAL IN
loop/holding_dimension1.625 INCHES NOMINAL IN
distance_from_base_to_lip0.187 INCHES NOMINAL IN
distance_from_loop_center_to_end3.531 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-245-8668
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BUWEPSDWG243031 5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.562 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 1.625 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.042 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 1.328 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT OVERALL
•
WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1075 OVERALL
TECHNICAL CHARACTERISTICS
LENGTH2.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION1.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.042 INCHES NOMINAL IN
LOOP OPENING WIDTH1.328 INCHES NOMINAL IN
SURFACE TREATMENTPAINT OVERALL
WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL COMP 1075 OVERALL
HOLE DIAMETER0.281 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
BUWEPSDWG2430314Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2430314Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BUWEPSDWG243031 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BUWEPSDWG243031 5?
BUWEPSDWG243031 5 is a CLIP,SPRING TENSION.
What parts can replace BUWEPSDWG243031 5?
There are 2 known substitutes for BUWEPSDWG243031 5: BUWEPSDWG2430314, 2430314. Substitute compatibility should be verified for your specific system.
What is the NSN for BUWEPSDWG243031 5?
BUWEPSDWG243031 5 is cataloged in the U.S. Government catalog under NSN 5340-00-245-8668. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BUWEPSDWG243031 5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.