PartsTable
Technical Data Sheet
Download PDF

BUWEPSDWG2412518 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BUWEPSDWG2412518: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, second_end_style: CHAMFERED, special_features: DRILLED HOLE ON 45.0 DEGREE CHAMFER END, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-905-0197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BUWEPSDWG2412518
NSN: 5315-00-905-0197
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
surface_finish125.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
second_end_styleCHAMFERED
special_featuresDRILLED HOLE ON 45.0 DEGREE CHAMFER END
surface_treatmentPASSIVATE OVERALL
pin_overall_length2.250 INCHES NOMINAL IN
first_hole_diameter0.059 INCHES NOMINAL IN
pin_overall_diameter0.1870 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-905-0197
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BUWEPSDWG2412518 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
SECOND END TAPER ANGLE: 20.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.059 INCHES NOMINAL IN
•
SECOND END TAPER LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
SECOND END TAPER ANGLE20.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.059 INCHES NOMINAL IN
SECOND END TAPER LENGTH0.125 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1870 INCHES NOMINAL IN
PIN OVERALL LENGTH2.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
2412518Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BUWEPSDWG2412518?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BUWEPSDWG2412518?
BUWEPSDWG2412518 is a PIN,STRAIGHT,HEADLESS.
What parts can replace BUWEPSDWG2412518?
There is 1 known substitute for BUWEPSDWG2412518: 2412518. Substitute compatibility should be verified for your specific system.
What is the NSN for BUWEPSDWG2412518?
BUWEPSDWG2412518 is cataloged in the U.S. Government catalog under NSN 5315-00-905-0197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BUWEPSDWG2412518

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.