PartsTable
Technical Data Sheet
Download PDF

BUWEPSDWG2219985 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BUWEPSDWG2219985: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, overall_length: 0.870 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES ALL OTHER SURFACES, undercut_width: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-115-9198, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BUWEPSDWG2219985
NSN: 5315-00-115-9198
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 08KE6 — NAVSURFWARCEN DET PICATINNY (USA)
SPECIFICATIONS
diameter0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
overall_length0.870 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES ALL OTHER SURFACES
undercut_width0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
first_end_styleCHAMFERED
effective_length0.510 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorGROOVE
surface_treatmentPASSIVATE OVERALL
undercut_diameter0.476 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-115-9198
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BUWEPSDWG2219985 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
UNDERCUT WIDTH: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.476 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
SURFACE FINISH125.0 MICROINCHES ALL OTHER SURFACES
UNDERCUT WIDTH0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.476 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
DIAMETER0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
OVERALL LENGTH0.870 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
2219985Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BUWEPSDWG2219985?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BUWEPSDWG2219985?
BUWEPSDWG2219985 is a PIN,GROOVED,HEADLESS.
What parts can replace BUWEPSDWG2219985?
There is 1 known substitute for BUWEPSDWG2219985: 2219985. Substitute compatibility should be verified for your specific system.
What is the NSN for BUWEPSDWG2219985?
BUWEPSDWG2219985 is cataloged in the U.S. Government catalog under NSN 5315-00-115-9198. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BUWEPSDWG2219985