PartsTable
Technical Data Sheet
Download PDF

BUWEPSDWG1612020 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BUWEPSDWG1612020: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, hardness_rating: 44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL, cross-sectional_thickness: 0.035 INCHES NOMINAL IN, cross-sectional_shape_style: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL, material_document_and_classification: 9205,FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-710-2906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BUWEPSDWG1612020
NSN: 5330-00-710-2906
FSC: 5330 — Packing and Gasket Materials
CAGE: 44114 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hardness_rating44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
cross-sectional_thickness0.035 INCHES NOMINAL IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
material_document_and_classification9205,FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-710-2906
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BUWEPSDWG1612020 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.035 INCHES NOMINAL IN
•
HARDNESS RATING: 44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9205,FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.035 INCHES NOMINAL IN
HARDNESS RATING44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION9205,FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
1612020Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BUWEPSDWG1612020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BUWEPSDWG1612020?
BUWEPSDWG1612020 is a GASKET.
What parts can replace BUWEPSDWG1612020?
There is 1 known substitute for BUWEPSDWG1612020: 1612020. Substitute compatibility should be verified for your specific system.
What is the NSN for BUWEPSDWG1612020?
BUWEPSDWG1612020 is cataloged in the U.S. Government catalog under NSN 5330-00-710-2906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BUWEPSDWG1612020

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.