BUWEPSDWG1601740 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

BUWEPSDWG1601740: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 14.000 POUNDS MINIMUM AND 18.000 POUNDS MAXIMUM LBS, inside_diameter: 1.406 INCHES NOMINAL IN, style_designator: CYLINDRICAL, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-815-4380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

BUWEPSDWG1601740

NSN: 5360-00-815-4380
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 44114 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	14.000 POUNDS MINIMUM AND 18.000 POUNDS MAXIMUM LBS
coil_quantity	4
inside_diameter	1.406 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	ZINC OVERALL
spring_free_length	1.687 INCHES NOMINAL IN
spring_solid_length	0.380 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_length_under_load	0.687 INCHES NOMINAL IN
spring_free_outside_diameter	1.592 INCHES NOMINAL IN
NSN	5360-00-815-4380

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 1.592 INCHES NOMINAL IN

•

LOAD RATING: 14.000 POUNDS MINIMUM AND 18.000 POUNDS MAXIMUM LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.380 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-465,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 1.687 INCHES NOMINAL IN

•

INSIDE DIAMETER: 1.406 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	1.592 INCHES NOMINAL IN
LOAD RATING	14.000 POUNDS MINIMUM AND 18.000 POUNDS MAXIMUM LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.380 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-465,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.687 INCHES NOMINAL IN
INSIDE DIAMETER	1.406 INCHES NOMINAL IN
SPRING LENGTH UNDER LOAD	0.687 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER	1.592 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

5360PL0897877Reference document

Same NSN cross-reference

Reference document — Informative reference only

1601740Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy BUWEPSDWG1601740?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is BUWEPSDWG1601740?

BUWEPSDWG1601740 is a SPRING,HELICAL,COMPRESSION.

What parts can replace BUWEPSDWG1601740?

There are 2 known substitutes for BUWEPSDWG1601740: 5360PL0897877, 1601740. Substitute compatibility should be verified for your specific system.

What is the NSN for BUWEPSDWG1601740?

BUWEPSDWG1601740 is cataloged in the U.S. Government catalog under NSN 5360-00-815-4380. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

BUWEPSDWG1601740 — SPRING,HELICAL,COMPRESSION

Request a Quote — BUWEPSDWG1601740