BUWEPSDWG1593140 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

BUWEPSDWG1593140: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL UNS K08500 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS, coil_quantity: 12, inside_diameter: 0.587 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-810-5919, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

BUWEPSDWG1593140

NSN: 5360-00-810-5919
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 44114 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)

SPECIFICATIONS

material	STEEL UNS K08500 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS
coil_quantity	12
inside_diameter	0.587 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
surface_treatment	ZINC OVERALL
spring_free_length	2.625 INCHES MINIMUM AND 2.875 INCHES MAXIMUM IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_length_under_load	1.750 INCHES NOMINAL IN
spring_free_outside_diameter	0.747 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
spring_solid_outside_diameter	0.747 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
NSN	5360-00-810-5919

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.747 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN

•

LOAD RATING: 18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 2.625 INCHES MINIMUM AND 2.875 INCHES MAXIMUM IN

•

INSIDE DIAMETER: 0.587 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN

•

SPRING LENGTH UNDER LOAD: 1.750 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.747 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
LOAD RATING	18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	2.625 INCHES MINIMUM AND 2.875 INCHES MAXIMUM IN
INSIDE DIAMETER	0.587 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
SPRING LENGTH UNDER LOAD	1.750 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER	0.747 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
COIL QUANTITY	12

SUBSTITUTES & CROSS-REFERENCES 1

1593140Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy BUWEPSDWG1593140?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is BUWEPSDWG1593140?

BUWEPSDWG1593140 is a SPRING,HELICAL,COMPRESSION.

What parts can replace BUWEPSDWG1593140?

There is 1 known substitute for BUWEPSDWG1593140: 1593140. Substitute compatibility should be verified for your specific system.

What is the NSN for BUWEPSDWG1593140?

BUWEPSDWG1593140 is cataloged in the U.S. Government catalog under NSN 5360-00-810-5919. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

BUWEPSDWG1593140 — SPRING,HELICAL,COMPRESSION

Request a Quote — BUWEPSDWG1593140