PartsTable
Technical Data Sheet
Download PDF

BUWEPSDWG1548006 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BUWEPSDWG1548006: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER AND PLASTIC POLYAMIDE NYLON OVERALL, hole_diameter: 0.166 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.375 INCHES NOMINAL IN, aperture_width: 1.125 INCHES NOMINAL IN, overall_length: 2.968 INCHES NOMINAL IN, aperture_length: 1.718 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-865-9969, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BUWEPSDWG1548006
NSN: 5330-00-865-9969
FSC: 5330 — Packing and Gasket Materials
CAGE: 08KE6 — NAVSURFWARCEN DET PICATINNY (USA)
SPECIFICATIONS
materialRUBBER AND PLASTIC POLYAMIDE NYLON OVERALL
hole_diameter0.166 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.375 INCHES NOMINAL IN
aperture_width1.125 INCHES NOMINAL IN
overall_length2.968 INCHES NOMINAL IN
aperture_length1.718 INCHES NOMINAL IN
hardness_rating44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
bolt_hole_quantity10
inside_corner_radius0.188 INCHES NOMINAL IN
cross-sectional_thickness0.035 INCHES NOMINAL IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
NSN5330-00-865-9969
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BUWEPSDWG1548006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.035 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.188 INCHES NOMINAL IN
•
HARDNESS RATING: 44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9205,GARLOCK INC MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.035 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.188 INCHES NOMINAL IN
HARDNESS RATING44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION9205,GARLOCK INC MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.968 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
OVERALL WIDTH2.375 INCHES NOMINAL IN
APERTURE WIDTH1.125 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BUWEPSDWG1548006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BUWEPSDWG1548006?
BUWEPSDWG1548006 is a GASKET.
What is the NSN for BUWEPSDWG1548006?
BUWEPSDWG1548006 is cataloged in the U.S. Government catalog under NSN 5330-00-865-9969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BUWEPSDWG1548006

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.