PartsTable
Technical Data Sheet
PartsTable / MRO / BS7111-7
BS7111-7 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.250 INCHES NOMINAL IN, body_height: 0.796 INCHES NOMINAL IN, body_length: 0.796 INCHES NOMINAL IN, terminal_length: 1.125 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-190-7588, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ BS7111-7
NSN: 5910-00-190-7588
FSC: 5910
CAGE: 93241 — ELECTRONIC DEVELOPMENT CO (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.250 INCHES NOMINAL IN
body_height0.796 INCHES NOMINAL IN
body_length0.796 INCHES NOMINAL IN
terminal_length1.125 INCHES MINIMUM IN
terminal_diameter0.040 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-5/4A GOVERNMENT SPECIFICATION A
NSN5910-00-190-7588
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,MICA DIELECTRIC TITLE COMPONENT PN BS7111-7 MFR CAPACITOR,FIXED,MICA D
KEY FEATURES
•
RELIABILITY INDICATOR: NOT ESTABLISHED
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
•
TEST DATA DOCUMENT: 81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
BODY LENGTH: 0.796 INCHES NOMINAL IN
•
TERMINAL DIAMETER: 0.040 INCHES NOMINAL IN
•
TERMINAL LENGTH: 1.125 INCHES MINIMUM IN
•
MATERIAL: PLASTIC CASE
•
TERMINAL SURFACE TREATMENT: SOLDER
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
RELIABILITY INDICATORNOT ESTABLISHED
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TEST DATA DOCUMENT81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BODY LENGTH0.796 INCHES NOMINAL IN
TERMINAL DIAMETER0.040 INCHES NOMINAL IN
TERMINAL LENGTH1.125 INCHES MINIMUM IN
MATERIALPLASTIC CASE
TERMINAL SURFACE TREATMENTSOLDER
CAPACITANCE VALUE PER SECTION2400.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION-5.00 TO 5.00 PERCENT SINGLE SECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1427Interchangeable
interchangeable cross-reference
interchangeable
105A140Interchangeable
interchangeable cross-reference
interchangeable
A8918Interchangeable
interchangeable cross-reference
interchangeable
060119Interchangeable
interchangeable cross-reference
interchangeable
51427Interchangeable
interchangeable cross-reference
interchangeable
K29832-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BS7111-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BS7111-7?
BS7111-7 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace BS7111-7?
There are 15 known substitutes for BS7111-7: 1427, 105A140, A8918 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BS7111-7?
BS7111-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-190-7588. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BS7111-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026