PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BS6-2081,PC.152
BS6-2081,PC.152 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BS6-2081,PC.152 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-168-0960, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BS6-2081,PC.152
NSN: 5340-00-168-0960
FSC: 5340
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
Part NumberBS6-2081,PC.152
NSN5340-00-168-0960
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BS6-2081,PC.152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY
•
INSIDE DIAMETER: 1.300 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR RECESS
•
MOUNTING OPENING SHAPE STYLE: THREADED HOLE
•
BODY THICKNESS: 0.622 INCHES NOMINAL IN
•
FIRST RECESS INSIDE HEIGHT: 0.640 INCHES NOMINAL IN
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.925 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY
END ITEM IDENTIFICATIONWARREN 9X6X16 VERTICAL SINGLE PUMP
INSIDE DIAMETER1.300 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECIRCULAR RECESS
MOUNTING OPENING SHAPE STYLETHREADED HOLE
BODY THICKNESS0.622 INCHES NOMINAL IN
FIRST RECESS INSIDE HEIGHT0.640 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.925 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND, ONE HOLE
OUTSIDE DIAMETER1.850 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
BS7-2082Interchangeable
interchangeable cross-reference
interchangeable
451242010-40ASSYInterchangeable
interchangeable cross-reference
interchangeable
BS5-1705PC12T019Interchangeable
interchangeable cross-reference
interchangeable
BS5-1705PC175Interchangeable
interchangeable cross-reference
interchangeable
BS5-1704PC175Interchangeable
interchangeable cross-reference
interchangeable
BS6-2081PC146Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BS6-2081,PC.152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BS6-2081,PC.152?
BS6-2081,PC.152 is a BS6-2081,PC.152.
What parts can replace BS6-2081,PC.152?
There are 21 known substitutes for BS6-2081,PC.152: BS7-2082, 451242010-40ASSY, BS5-1705PC12T019 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BS6-2081,PC.152?
BS6-2081,PC.152 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-168-0960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BS6-2081,PC.152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026