PartsTable
Technical Data Sheet
Download PDF

BS51034 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BS51034: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.219 INCHES NOMINAL IN, style_designator: STANDARD, surface_treatment: ENAMEL, head_outside_diameter: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-291-0371, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BS51034
NSN: 5340-00-291-0371
FSC: 5340 — Hardware, Commercial
CAGE: 61864 — TRW ASSEMBLIES AND FASTENERS GROUP (USA)
SPECIFICATIONS
materialCOPPER ALLOY
head_height0.062 INCHES NOMINAL IN
overall_height0.219 INCHES NOMINAL IN
prong_quantity6
style_designatorSTANDARD
surface_treatmentENAMEL
head_outside_diameter0.438 INCHES NOMINAL IN
prong_outside_diameter0.328 INCHES NOMINAL IN
hole_accommodation_diameter0.312 INCHES NOMINAL IN
material_accommodated_thickness0.020 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NSN5340-00-291-0371
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BS51034 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.020 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 0.328 INCHES NOMINAL IN
•
SURFACE TREATMENT: ENAMEL
•
HEAD OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.219 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.312 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.020 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER0.328 INCHES NOMINAL IN
SURFACE TREATMENTENAMEL
HEAD OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
PRONG QUANTITY6
SUBSTITUTES & CROSS-REFERENCES 5
48199Reference document
Same NSN cross-reference
Reference document — Secondary reference
4990045-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
540536-607Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D2730Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
74288-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy BS51034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BS51034?
BS51034 is a BUTTON,PLUG.
What parts can replace BS51034?
There are 5 known substitutes for BS51034: 48199, 4990045-1, 540536-607 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BS51034?
BS51034 is cataloged in the U.S. Government catalog under NSN 5340-00-291-0371. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BS51034