PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BRSAJ5
BRSAJ5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 0.7500 INCHES MINIMUM AND 0.7504 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 1.2130 INCHES MINIMUM AND 1.2180 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-9488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BRSAJ5
NSN: 3110-00-114-9488
FSC: 3110
CAGE: 05643 — BARBER-GREENE CO (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter0.7500 INCHES MINIMUM AND 0.7504 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width1.2130 INCHES MINIMUM AND 1.2180 INCHES MAXIMUM IN
outer_ring_width0.6250 INCHES NOMINAL IN
special_featuresW/FELT ENCLOSED SEALS
style_designatorSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDS BOTH SIDES, WITH SETSCREW IN INNER RING, GREASE GROOVE AND SNAP RING ON OUTER RING
bearing_seal_typeLABYRINTH
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
NSN3110-00-114-9488
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BRSAJ5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
•
OUTER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: LABYRINTH
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
SPECIAL FEATURESW/FELT ENCLOSED SEALS
OUTER RING WIDTH0.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
SEAL QUANTITY2
BEARING SEAL TYPELABYRINTH
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
G4036Interchangeable
interchangeable cross-reference
interchangeable
387889C5Interchangeable
interchangeable cross-reference
interchangeable
10122Interchangeable
interchangeable cross-reference
interchangeable
892089Interchangeable
interchangeable cross-reference
interchangeable
PR-1,2Interchangeable
interchangeable cross-reference
interchangeable
ER-1,2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BRSAJ5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BRSAJ5?
BRSAJ5 is a BEARING,BALL,ANNULAR.
What parts can replace BRSAJ5?
There are 11 known substitutes for BRSAJ5: G4036, 387889C5, 10122 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BRSAJ5?
BRSAJ5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-9488. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BRSAJ5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026