PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BRG4020-22
BRG4020-22 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OR COPPER ALLOY RETAINER, bore_diameter: 1.2500 INCHES NOMINAL IN, overall_width: 1.2500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND OIL GROOVE IN OUTER RING,MFR STD RETAINER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-190-6651, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BRG4020-22
NSN: 3110-00-190-6651
FSC: 3110
CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
materialSTEEL OR COPPER ALLOY RETAINER
bore_diameter1.2500 INCHES NOMINAL IN
overall_width1.2500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING,MFR STD RETAINER
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.7500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-190-6651
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BRG4020-22 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.7500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
BORE DIAMETER1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7235Interchangeable
interchangeable cross-reference
interchangeable
202820Interchangeable
interchangeable cross-reference
interchangeable
NB1Interchangeable
interchangeable cross-reference
interchangeable
763181Interchangeable
interchangeable cross-reference
interchangeable
723FCTInterchangeable
interchangeable cross-reference
interchangeable
HJ202820Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy BRG4020-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BRG4020-22?
BRG4020-22 is a BEARING,ROLLER,NEEDLE.
What parts can replace BRG4020-22?
There are 13 known substitutes for BRG4020-22: 7235, 202820, NB1 and 10 more. Substitute compatibility should be verified for your specific system.
Is BRG4020-22 still available?
BRG4020-22 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BRG4020-22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026