PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BR-1008-13
BR-1008-13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FERRULE,HANDLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, recess_depth: 0.188 INCHES MINIMUM AND 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM0.192 INCHES MAXIMUM IN, hole_diameter: 0.219 INCHES NOMINAL0.219 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, mounting_method: FERRULEFERRULE, recess_diameter: 0.316 INCHES MINIMUM AND 0.316 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-468-2681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BR-1008-13
NSN: 5340-01-468-2681
FSC: 5340
CAGE: 5W748 — CAREY MANUFACTURING COMPANY, INC. DBA AMATOM ELECTRONIC HARDWARES (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
recess_depth0.188 INCHES MINIMUM AND 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM0.192 INCHES MAXIMUM IN
hole_diameter0.219 INCHES NOMINAL0.219 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
mounting_methodFERRULEFERRULE
recess_diameter0.316 INCHES MINIMUM AND 0.316 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN
outside_diameter0.562 INCHES NOMINAL0.562 INCHES NOMINAL IN
style_designatorROUND
surface_treatmentCHROMIUM OVERALL
material_document_and_classificationQQ-B-626,COMP 22, 1/2 HARD, OR LEADED COMMERCIAL BRASS FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-468-2681
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BR-1008-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ROUND
•
SURFACE TREATMENT: CHROMIUM OVERALL
•
MATERIAL: COPPER ALLOY 360 OVERALL
•
MOUNTING METHOD: FERRULEFERRULE
•
RECESS DIAMETER: 0.316 INCHES MINIMUM AND 0.316 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.562 INCHES NOMINAL0.562 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.219 INCHES NOMINAL0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORROUND
SURFACE TREATMENTCHROMIUM OVERALL
MATERIALCOPPER ALLOY 360 OVERALL
OVERALL HEIGHT0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
MOUNTING METHODFERRULEFERRULE
RECESS DIAMETER0.316 INCHES MINIMUM AND 0.316 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.562 INCHES NOMINAL0.562 INCHES NOMINAL IN
HOLE DIAMETER0.219 INCHES NOMINAL0.219 INCHES NOMINAL IN
RECESS DEPTH0.188 INCHES MINIMUM AND 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM0.192 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,COMP 22, 1/2 HARD, OR LEADED COMMERCIAL BRASS FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
C1100Upgraded Successor
successor cross-reference
successor
406961Interchangeable
interchangeable cross-reference
interchangeable
30-7624Interchangeable
interchangeable cross-reference
interchangeable
204-669Interchangeable
interchangeable cross-reference
interchangeable
H90013Interchangeable
interchangeable cross-reference
interchangeable
BM150Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BR-1008-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BR-1008-13?
BR-1008-13 is a FERRULE,HANDLE.
What parts can replace BR-1008-13?
There are 19 known substitutes for BR-1008-13: C1100, 406961, 30-7624 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BR-1008-13?
BR-1008-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-468-2681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BR-1008-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026