PartsTable
Technical Data Sheet
Download PDF

BP246-A1G1 — BP246-A1G1

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

BP246-A1G1: BP246-A1G1.

The BP246-A1G1 is a the manufacturer industrial component. Key specifications include material: PLASTIC, inside_width: 0.108 INCHES NOMINAL IN, inside_diameter: 0.128 INCHES NOMINAL IN, outside_diameter: 0.880 INCHES NOMINAL IN, screw_drive_type: HEXAGON SOCKET, style_designator: ROUND WITH SINGLE POINTED BAR FACE. This part is cataloged in the U.S.

Government catalog under NSN 5355-01-406-8928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BP246-A1G1
NSN: 5355-01-406-8928
FSC: 5355 — Knobs and Pointers
CAGE: 81590 — KORRY ELECTRONICS CO (USA)
SPECIFICATIONS
materialPLASTIC
inside_width0.108 INCHES NOMINAL IN
inside_diameter0.128 INCHES NOMINAL IN
outside_diameter0.880 INCHES NOMINAL IN
screw_drive_typeHEXAGON SOCKET
style_designatorROUND WITH SINGLE POINTED BAR FACE
attachment_methodSETSCREWS
overall_thickness0.560 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES SCREW HOLE IN
setscrew_hole_quantity2
end_item_identificationJOINT STARS TARGET RADAR SYSTEM
thread_quantity_per_inch40 SCREW HOLE
NSN5355-01-406-8928
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BP246-A1G1 TITLE COMPONENT PN BP246-A1G1 MFR BP246-A1G1
KEY FEATURES
•
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE: 0.250 INCHES NOMINAL IN
•
INSIDE WIDTH: 0.108 INCHES NOMINAL IN
•
SHAFT ACCOMMODATION STYLE: FLATTED ONE SIDE
•
OVERALL THICKNESS: 0.560 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND WITH SINGLE POINTED BAR FACE
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
•
SETSCREW HOLE QUANTITY: 2
•
NOMINAL THREAD SIZE: 0.112 INCHES SCREW HOLE IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE0.250 INCHES NOMINAL IN
INSIDE WIDTH0.108 INCHES NOMINAL IN
SHAFT ACCOMMODATION STYLEFLATTED ONE SIDE
OVERALL THICKNESS0.560 INCHES NOMINAL IN
STYLE DESIGNATORROUND WITH SINGLE POINTED BAR FACE
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
SETSCREW HOLE QUANTITY2
NOMINAL THREAD SIZE0.112 INCHES SCREW HOLE IN
INSIDE DIAMETER0.128 INCHES NOMINAL IN
GRIPPING SURFACE CONDITIONGRIP AID
SUBSTITUTES & CROSS-REFERENCES 2
K235A012Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
10422118Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BP246-A1G1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BP246-A1G1?
BP246-A1G1 is a BP246-A1G1.
What parts can replace BP246-A1G1?
There are 2 known substitutes for BP246-A1G1: K235A012, 10422118. Substitute compatibility should be verified for your specific system.
What is the NSN for BP246-A1G1?
BP246-A1G1 is cataloged in the U.S. Government catalog under NSN 5355-01-406-8928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BP246-A1G1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.