PartsTable
Technical Data Sheet
Download PDF

BN388M5X12 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

BN388M5X12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_height: 2.5 MILLIMETERS MAXIMUM MM, head_diameter: 9.2 MILLIMETERS MAXIMUM MM, screw_material: STEEL, fastener_length: 12.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-717-4143, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BN388M5X12
NSN: 5305-01-717-4143
FSC: 5305 — Screws
CAGE: 1CJ86 — BOSSARD INTL INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_height2.5 MILLIMETERS MAXIMUM MM
head_diameter9.2 MILLIMETERS MAXIMUM MM
screw_materialSTEEL
fastener_length12.0 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationD-ILS ATCALS
nominal_thread_diameter5.0 MILLIMETERS MM
screw_surface_treatmentZINC
thread_series_designatorM
NSN5305-01-717-4143
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: BN388M5X12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 2.5 MILLIMETERS MAXIMUM MM
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 12.0 MILLIMETERS NOMINAL MM
•
THREAD PITCH IN MILLIMETERS: 0.8
•
NOMINAL THREAD DIAMETER: 5.0 MILLIMETERS MM
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT2.5 MILLIMETERS MAXIMUM MM
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH12.0 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS0.8
NOMINAL THREAD DIAMETER5.0 MILLIMETERS MM
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
IN3119292XNSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BN388M5X12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BN388M5X12?
BN388M5X12 is a SCREW,MACHINE.
What parts can replace BN388M5X12?
There is 1 known substitute for BN388M5X12: IN3119292XN. Substitute compatibility should be verified for your specific system.
What is the NSN for BN388M5X12?
BN388M5X12 is cataloged in the U.S. Government catalog under NSN 5305-01-717-4143. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BN388M5X12