BN360PB-428-3 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

BN360PB-428-3: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 305 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.157 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, shank_style: BLIND RIVET, NUT AND BOLT (ASSEMBLY), thread_class: 3B, heat_treatment: ANNEALED SLEEVE. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-322-3184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

BN360PB-428-3

NSN: 5320-01-322-3184
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 304 OR STEEL COMP 305 SLEEVE
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.157 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
shank_style	BLIND RIVET, NUT AND BOLT (ASSEMBLY)
thread_class	3B
heat_treatment	ANNEALED SLEEVE
shank_diameter	0.387 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
expansion_device	THREADED MANDREL
special_features	FURNISHED WITHOUT BOLT
thread_direction	RIGHT-HAND
countersink_angle	98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM
surface_treatment	CADMIUM AND CHROMATE EXPANDER
NSN	5320-01-322-3184

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.387 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN

•

EXPANSION DEVICE: THREADED MANDREL

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE EXPANDER

•

HEAT TREATMENT: ANNEALED SLEEVE

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732,COND HT-125 MIL SPEC SINGLE MATERIAL RESPONSE EXPANDER

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.387 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
EXPANSION DEVICE	THREADED MANDREL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE EXPANDER
HEAT TREATMENT	ANNEALED SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18732,COND HT-125 MIL SPEC SINGLE MATERIAL RESPONSE EXPANDER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE SLEEVE
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.250 INCHES IN
GRIP LENGTH	0.157 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

2868669-37Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy BN360PB-428-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is BN360PB-428-3?

BN360PB-428-3 is a RIVET,BLIND.

What parts can replace BN360PB-428-3?

There is 1 known substitute for BN360PB-428-3: 2868669-37. Substitute compatibility should be verified for your specific system.

What is the NSN for BN360PB-428-3?

BN360PB-428-3 is cataloged in the U.S. Government catalog under NSN 5320-01-322-3184. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

BN360PB-428-3 — RIVET,BLIND

Request a Quote — BN360PB-428-3