PartsTable
Technical Data Sheet
Download PDF

BN2843-M12 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BN2843-M12: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, hole_diameter: 13.0 MILLIMETERS MINIMUM MM, major_thickness: 1.00 MILLIMETERS NOMINAL MM, style_designator: FLAT INTERNAL TEETH, width_between_flats: 20.5 MILLIMETERS MAXIMUM MM, internal_key_quantity: 10. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-687-7190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BN2843-M12
NSN: 5310-01-687-7190
FSC: 5310 — Nuts and Washers
CAGE: S7023 — BOSSARD LTD FASTENERS (CHE)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
hole_diameter13.0 MILLIMETERS MINIMUM MM
major_thickness1.00 MILLIMETERS NOMINAL MM
style_designatorFLAT INTERNAL TEETH
width_between_flats20.5 MILLIMETERS MAXIMUM MM
internal_key_quantity10
end_item_identification2350-01-619-5649
part_name_assigned_by_controlling_agencyINTERNAL TOOTH LOCK WASHER
NSN5310-01-687-7190
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BN2843-M12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
WIDTH BETWEEN FLATS: 20.5 MILLIMETERS MAXIMUM MM
•
MAJOR THICKNESS: 1.00 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL COMP 304 OVERALL
•
INTERNAL KEY QUANTITY: 10
•
HOLE DIAMETER: 13.0 MILLIMETERS MINIMUM MM
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
WIDTH BETWEEN FLATS20.5 MILLIMETERS MAXIMUM MM
MAJOR THICKNESS1.00 MILLIMETERS NOMINAL MM
PART NAME ASSIGNED BY CONTROLLING AGENCYINTERNAL TOOTH LOCK WASHER
END ITEM IDENTIFICATION2350-01-619-5649
MATERIALSTEEL COMP 304 OVERALL
INTERNAL KEY QUANTITY10
HOLE DIAMETER13.0 MILLIMETERS MINIMUM MM
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
71LISM12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BN2843-M12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BN2843-M12?
BN2843-M12 is a WASHER,LOCK.
What parts can replace BN2843-M12?
There is 1 known substitute for BN2843-M12: 71LISM12. Substitute compatibility should be verified for your specific system.
What is the NSN for BN2843-M12?
BN2843-M12 is cataloged in the U.S. Government catalog under NSN 5310-01-687-7190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BN2843-M12