PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BM945-50
BM945-50 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, thread_class: 2A A, inside_length: 3.625 INCHES NOMINAL IN, mounting_method: THREADED STUD(S), handle_clearance: 1.298 INCHES NOMINAL IN, style_designator: OVAL OPEN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-083-0932, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BM945-50
NSN: 5340-01-083-0932
FSC: 5340
CAGE: 08730 — VEMALINE PRODUCTS INC DBA HANDLES UNLIMITED DIV HANDLES UNLIMITED (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
thread_class2A A
inside_length3.625 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)
handle_clearance1.298 INCHES NOMINAL IN
style_designatorOVAL OPEN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.375 INCHES IN
distance_between_ends3.688 INCHES NOMINAL IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationAISI 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-083-0932
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BM945-50 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 303 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: OVAL OPEN
•
THREAD SERIES DESIGNATOR: UNF
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
DISTANCE BETWEEN ENDS: 3.688 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.000 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATOROVAL OPEN
THREAD SERIES DESIGNATORUNF
SURFACE TREATMENTPASSIVATE OVERALL
DISTANCE BETWEEN ENDS3.688 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
MOUNTING METHODTHREADED STUD(S)
HANDLE CLEARANCE1.298 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1-574Interchangeable
interchangeable cross-reference
interchangeable
200-9002-000Interchangeable
interchangeable cross-reference
interchangeable
1-574-1Interchangeable
interchangeable cross-reference
interchangeable
764Interchangeable
interchangeable cross-reference
interchangeable
000.239.0764Interchangeable
interchangeable cross-reference
interchangeable
C10A343Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BM945-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BM945-50?
BM945-50 is a HANDLE,BAIL.
What parts can replace BM945-50?
There are 15 known substitutes for BM945-50: 1-574, 200-9002-000, 1-574-1 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BM945-50?
BM945-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-083-0932. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BM945-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026