PartsTable
Technical Data Sheet
Download PDF

BM33024V4-13 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

BM33024V4-13: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, grip_length: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN, head_height: 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-241-0202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BM33024V4-13
NSN: 5305-01-241-0202
FSC: 5305 — Screws
CAGE: 97928 — HUCK INTL INC (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
grip_length0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
head_height0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES GRIP
fastener_length1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES MAXIMUM
NSN5305-01-241-0202
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: BM33024V4-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4967 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES GRIP
HEAD HEIGHT0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
FASTENER LENGTH1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
THREAD LENGTH0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4967 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 5
ST3M430V4-13DReference document
Same NSN cross-reference
Reference document — Secondary reference
HT8137-4-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT271-4-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
110179-4-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M430V4-130Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BM33024V4-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BM33024V4-13?
BM33024V4-13 is a SCREW,CLOSE TOLERANCE.
What parts can replace BM33024V4-13?
There are 5 known substitutes for BM33024V4-13: ST3M430V4-13D, HT8137-4-13, HT271-4-13 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BM33024V4-13?
BM33024V4-13 is cataloged in the U.S. Government catalog under NSN 5305-01-241-0202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BM33024V4-13