PartsTable
Technical Data Sheet
Download PDF

BL6124 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BL6124: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 125.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.688 INCHES NOMINAL IN, first_leg_length: 0.812 INCHES NOMINAL IN, second_leg_angle: 125.0 DEGREES NOMINAL, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-850-4763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BL6124
NSN: 5340-00-850-4763
FSC: 5340 — Hardware, Commercial
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
first_leg_angle125.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.688 INCHES NOMINAL IN
first_leg_length0.812 INCHES NOMINAL IN
second_leg_angle125.0 DEGREES NOMINAL
second_leg_styleSQUARE
second_leg_width0.688 INCHES NOMINAL IN
special_features2ND LEG,ONE CORNER CHAMFERED 0.250 IN. BY 40.0 DEG ANGLE IN
style_designatorDOUBLE ANGLE
second_leg_length0.937 INCHES NOMINAL IN
surface_treatmentOXIDE
fabrication_methodSTAMPED
NSN5340-00-850-4763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BL6124 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.312 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.312 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.199 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 125.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.125 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 125.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.259 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.312 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.312 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.199 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG ANGLE125.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.125 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE125.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.259 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH0.688 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy BL6124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BL6124?
BL6124 is a BRACKET,DOUBLE ANGLE.
What is the NSN for BL6124?
BL6124 is cataloged in the U.S. Government catalog under NSN 5340-00-850-4763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BL6124

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.