BKAE1125-30007: CONNECTOR ASSEMBLY,ELECTRICAL.
The CONNECTOR ASSEMBLY,ELECTRICAL is a the manufacturer industrial component. Key specifications include overall_width: 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN, component_name: ARINC 600, RACK AND PANEL PLUG, overall_height: 1.935 INCHES MAXIMUM IN, overall_length: 6.995 INCHES MAXIMUM IN, precious_material: GOLD, end_item_identification: AIRCRAFT, C-2A (REPROCURED) A. This part is cataloged in the U.S.
Government catalog under NSN 5935-01-534-5914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| overall_width | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN |
| component_name | ARINC 600, RACK AND PANEL PLUG |
| overall_height | 1.935 INCHES MAXIMUM IN |
| overall_length | 6.995 INCHES MAXIMUM IN |
| special_features | THE SHELL IS ALUMINUN ALLOY WITH AN ALODINE PLATING. THE 3 POLARIZING POSTS ARE AS FOLLOWS; LEFT AND CENTER ARE AT POSITION 1, AND THE RIGHT IS AT POSITION 6. |
| precious_material | GOLD |
| component_quantity | 3 |
| end_item_identification | AIRCRAFT, C-2A (REPROCURED) A |
| precious_material_and_location | CONTACT PLATING GOLD |
| NSN | 5935-01-534-5914 |
| COMPONENT NAME | ARINC 600, RACK AND PANEL PLUG |
| COMPONENT QUANTITY | 3 |
| OVERALL HEIGHT | 1.935 INCHES MAXIMUM IN |
| PRECIOUS MATERIAL | GOLD |
| SUPPLEMENTARY FEATURES | THE CONTACTS ARE ENVIRONMENTAL, REAR RELEASE, CRIMP CONTACTS MADE OF COPPER ALLOY, WITH A PLATING OF GOLD OVER NICKLE. THE 3 CONNECTORS INSERTS HOLD THE FOLLOWING; "A" AND "B" HOLD 60, SIZE 22 PINS EACH AND "C" HOLDS A TOTAL OF 5 (1 SIZE 12, 2 SIZE 16, AND 2 SIZE 5 COAXIAL). |
| OVERALL LENGTH | 6.995 INCHES MAXIMUM IN |
| OVERALL WIDTH | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN |
| SPECIAL FEATURES | THE SHELL IS ALUMINUN ALLOY WITH AN ALODINE PLATING. THE 3 POLARIZING POSTS ARE AS FOLLOWS; LEFT AND CENTER ARE AT POSITION 1, AND THE RIGHT IS AT POSITION 6. |
| MOUNTING CONFIGURATION | FOUR 0.148 INCH DIAMETER MOUNTING HOLES. THE TWO AT THE TOP AND BOTTOM ARE A MINIMUM OF 0.645 INCHES AND A MAXIMUM OF 0.655 INCHES APART WHILE THE HOLES ON THE SIDES ARE A MINIMUM OF 6.345 INCHES AND A MAXIMUM OF 6.355 INCHES APART. IN |
| PRECIOUS MATERIAL AND LOCATION | CONTACT PLATING GOLD |
No substitute or cross-reference records for this part.