PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BHMA-A156.20 A81222 3IN
BHMA-A156.20 A81222 3IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BHMA-A156.20 A81222 3IN is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2583, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BHMA-A156.20 A81222 3IN
NSN: 5340-00-240-2583
FSC: 5340
CAGE: 41280 — BUILDERS HARDWARE MFRS ASSN INC (USA)
SPECIFICATIONS
Part NumberBHMA-A156.20 A81222 3IN
NSN5340-00-240-2583
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BHMA-A156.20 A81222 3IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A153 ASSN STD SINGLE TREATMENT RESPONSE BODY
•
STYLE DESIGNATOR: STRAP
•
MATERIAL: STEEL BODY
•
MOUNTING HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
BODY WIDTH: 1.094 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 3.000 INCHES NOMINAL IN
•
KNUCKLE QUANTITY: 3
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A153 ASSN STD SINGLE TREATMENT RESPONSE BODY
STYLE DESIGNATORSTRAP
MATERIALSTEEL BODY
MOUNTING HOLE DIAMETER0.144 INCHES NOMINAL IN
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
BODY WIDTH1.094 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE3.000 INCHES NOMINAL IN
KNUCKLE QUANTITY3
MATERIALCOPPER ALLOY AND STEEL CORROSION RESISTING PIN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626, COMP 11 FED SPEC SINGLE MATERIAL RESPONSE AND FED STD 66, COMP 302, 303, OR 304 FED STD SINGLE MATERIAL RESPONSE PIN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
BHMA-A156.20Upgraded Successor
successor cross-reference
successor
MS27970-26Upgraded Successor
successor cross-reference
successor
FFH116Upgraded Successor
successor cross-reference
successor
BHMA-A156.1 A2133 3-1/2INUpgraded Successor
successor cross-reference
successor
ANSI A156.1 A2133Upgraded Successor
successor cross-reference
successor
01555Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy BHMA-A156.20 A81222 3IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BHMA-A156.20 A81222 3IN?
BHMA-A156.20 A81222 3IN is a BHMA-A156.20 A81222 3IN.
What parts can replace BHMA-A156.20 A81222 3IN?
There are 19 known substitutes for BHMA-A156.20 A81222 3IN: BHMA-A156.20, MS27970-26, FFH116 and 16 more. Substitute compatibility should be verified for your specific system.
Is BHMA-A156.20 A81222 3IN still available?
BHMA-A156.20 A81222 3IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BHMA-A156.20 A81222 3IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026