PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BHMA-A156.16 L84212 5IN
BHMA-A156.16 L84212 5IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BHMA-A156.16 L84212 5IN is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2298, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BHMA-A156.16 L84212 5IN
NSN: 5340-00-240-2298
FSC: 5340
CAGE: 41280 — BUILDERS HARDWARE MFRS ASSN INC (USA)
SPECIFICATIONS
Part NumberBHMA-A156.16 L84212 5IN
NSN5340-00-240-2298
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BHMA-A156.16 L84212 5IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ENAMEL PLATE
•
NONDEFINITIVE SPEC/STD DATA: F1012 TYPE
•
DIAMETER: 0.375 INCHES NOMINAL BAR IN
•
STRIKE QUANTITY: 1
•
WIDTH: 1.438 INCHES NOMINAL PLATE IN
•
STRIKE TYPE: SURFACE
•
LENGTH: 6.000 INCHES NOMINAL PLATE IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTENAMEL PLATE
NONDEFINITIVE SPEC/STD DATAF1012 TYPE
SPECIAL FEATURESWEIGHT:4.750 LBS PER DOZEN;BAR O/A LG:3.000 IN.NOM;MATL:STEEL; LBS
DIAMETER0.375 INCHES NOMINAL BAR IN
STRIKE QUANTITY1
WIDTH1.438 INCHES NOMINAL PLATE IN
STRIKE TYPESURFACE
LENGTH6.000 INCHES NOMINAL PLATE IN
FEATURES PROVIDEDSCREW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
BHMA-A156.16 L02032Interchangeable
interchangeable cross-reference
interchangeable
CD7071F8Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.16 P/N L02032Interchangeable
interchangeable cross-reference
interchangeable
T-244-MInterchangeable
interchangeable cross-reference
interchangeable
72-700476-1Interchangeable
interchangeable cross-reference
interchangeable
MS35431-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BHMA-A156.16 L84212 5IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BHMA-A156.16 L84212 5IN?
BHMA-A156.16 L84212 5IN is a BHMA-A156.16 L84212 5IN.
What parts can replace BHMA-A156.16 L84212 5IN?
There are 27 known substitutes for BHMA-A156.16 L84212 5IN: BHMA-A156.16 L02032, CD7071F8, ANSI A156.16 P/N L02032 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BHMA-A156.16 L84212 5IN?
BHMA-A156.16 L84212 5IN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BHMA-A156.16 L84212 5IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026