PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BHMA-A156.16 L14213 2.5IN
BHMA-A156.16 L14213 2.5IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BHMA-A156.16 L14213 2.5IN is a the manufacturer industrial component. Key specifications include Drive Bays: 13x 2.5" SFF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2310, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BHMA-A156.16 L14213 2.5IN
NSN: 5340-00-240-2310
FSC: 5340
CAGE: 41280 — BUILDERS HARDWARE MFRS ASSN INC (USA)
SPECIFICATIONS
Drive Bays13x 2.5" SFF
NSN5340-00-240-2310
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BHMA-A156.16 L14213 2.5IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1011 TYPE
•
DEPARTURE FROM CITED DESIGNATOR: CZFL,AAXE,ABVT;BAR O/A LG:2.500 IN.NOM;WEIGHT:1.750 LBS PER DOZEN LBS
•
STRIKE TYPE: RIM
•
STRIKE QUANTITY: 1
•
LENGTH: 2.500 INCHES NOMINAL PLATE IN
•
WIDTH: 1.000 INCHES NOMINAL PLATE IN
•
DIAMETER: 0.250 INCHES NOMINAL BAR IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA1011 TYPE
DEPARTURE FROM CITED DESIGNATORCZFL,AAXE,ABVT;BAR O/A LG:2.500 IN.NOM;WEIGHT:1.750 LBS PER DOZEN LBS
STRIKE TYPERIM
SPECIAL FEATURESWEIGHT:1.750 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:BRASS; LBS
STRIKE QUANTITY1
LENGTH2.500 INCHES NOMINAL PLATE IN
WIDTH1.000 INCHES NOMINAL PLATE IN
DIAMETER0.250 INCHES NOMINAL BAR IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
BHMA-A156.16 L02032Interchangeable
interchangeable cross-reference
interchangeable
CD7071F8Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.16 P/N L02032Interchangeable
interchangeable cross-reference
interchangeable
ANSIA156.16L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16 L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BHMA-A156.16 L14213 2.5IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BHMA-A156.16 L14213 2.5IN?
BHMA-A156.16 L14213 2.5IN is a BHMA-A156.16 L14213 2.5IN.
What parts can replace BHMA-A156.16 L14213 2.5IN?
There are 25 known substitutes for BHMA-A156.16 L14213 2.5IN: BHMA-A156.16 L02032, CD7071F8, ANSI A156.16 P/N L02032 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BHMA-A156.16 L14213 2.5IN?
BHMA-A156.16 L14213 2.5IN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2310. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BHMA-A156.16 L14213 2.5IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026