PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BH2095W
BH2095W ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, thread_size: 8-32, shank_length: 0.250 INCHES NOMINAL IN, overall_height: 0.625 INCHES NOMINAL IN, style_designator: FLAT RECESSED TOP THREADED STUD, outside/top_flange_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-842-2807, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BH2095W
NSN: 5340-00-842-2807
FSC: 5340
CAGE: 86510 — PHILPOTT RUBBER CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
thread_size8-32
shank_length0.250 INCHES NOMINAL IN
overall_height0.625 INCHES NOMINAL IN
style_designatorFLAT RECESSED TOP THREADED STUD
outside/top_flange_diameter0.750 INCHES NOMINAL IN
NSN5340-00-842-2807
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BH2095W MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
STYLE DESIGNATOR: FLAT RECESSED TOP THREADED STUD
•
THREAD SIZE: 8-32
•
OUTSIDE/TOP FLANGE DIAMETER: 0.750 INCHES NOMINAL IN
•
SHANK LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
OVERALL HEIGHT0.625 INCHES NOMINAL IN
STYLE DESIGNATORFLAT RECESSED TOP THREADED STUD
THREAD SIZE8-32
OUTSIDE/TOP FLANGE DIAMETER0.750 INCHES NOMINAL IN
SHANK LENGTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
605023Interchangeable
interchangeable cross-reference
interchangeable
7377022Interchangeable
interchangeable cross-reference
interchangeable
604-285Interchangeable
interchangeable cross-reference
interchangeable
263-164Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy BH2095W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BH2095W?
BH2095W is a BUMPER.
What parts can replace BH2095W?
There are 4 known substitutes for BH2095W: 605023, 7377022, 604-285 and 1 more. Substitute compatibility should be verified for your specific system.
Is BH2095W still available?
BH2095W is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BH2095W

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026