PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BH1110X0H
BH1110X0H ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.6875 INCHES NOMINAL IN, overall_width: 0.6250 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-927-2049, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BH1110X0H
NSN: 3110-00-927-2049
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.6875 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.9375 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-927-2049
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BH1110X0H · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.6875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.9375 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL OUTSIDE DIAMETER0.9375 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RING
SURFACE FINISHGROUND
OVERALL WIDTH0.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2071103Interchangeable
interchangeable cross-reference
interchangeable
209103Interchangeable
interchangeable cross-reference
interchangeable
0209103-1Interchangeable
interchangeable cross-reference
interchangeable
27222Interchangeable
interchangeable cross-reference
interchangeable
X226-433Interchangeable
interchangeable cross-reference
interchangeable
FA102Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BH1110X0H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BH1110X0H?
BH1110X0H is a BEARING,ROLLER,NEEDLE.
What parts can replace BH1110X0H?
There are 12 known substitutes for BH1110X0H: 2071103, 209103, 0209103-1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BH1110X0H?
BH1110X0H is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-927-2049. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BH1110X0H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026