PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BE205
BE205 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_depth: 0.750 INCHES NOMINAL IN, hole_diameter: 0.219 INCHES NOMINAL IN, overall_height: 0.875 INCHES NOMINAL IN, special_features: ENCLOSED END 0.438 IN. DIA IN, style_designator: FLAT RECESSED TOP.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-4086, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BE205
NSN: 5340-00-286-4086
FSC: 5340
CAGE: 73439 — AMSCO PRODUCTS CAMCAR DIV TEXTRON INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_depth0.750 INCHES NOMINAL IN
hole_diameter0.219 INCHES NOMINAL IN
overall_height0.875 INCHES NOMINAL IN
special_featuresENCLOSED END 0.438 IN. DIA IN
style_designatorFLAT RECESSED TOP
outside/top_flange_diameter0.375 INCHES NOMINAL IN
NSN5340-00-286-4086
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BE205 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DEPTH: 0.750 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.375 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
STYLE DESIGNATOR: FLAT RECESSED TOP
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESENCLOSED END 0.438 IN. DIA IN
HOLE DEPTH0.750 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.875 INCHES NOMINAL IN
HOLE DIAMETER0.219 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
STYLE DESIGNATORFLAT RECESSED TOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
9-109Interchangeable
interchangeable cross-reference
interchangeable
26492Interchangeable
interchangeable cross-reference
interchangeable
22126HInterchangeable
interchangeable cross-reference
interchangeable
127892Interchangeable
interchangeable cross-reference
interchangeable
1866 3/4INInterchangeable
interchangeable cross-reference
interchangeable
45162Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BE205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BE205?
BE205 is a BUMPER.
What parts can replace BE205?
There are 10 known substitutes for BE205: 9-109, 26492, 22126H and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BE205?
BE205 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-4086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BE205

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026