PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BDE01516
BDE01516 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.281 INCHES NOMINAL IN, diameter: 0.312 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT FILLISTER, chamfer_length: 0.062 INCHES NOMINAL IN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-941-9428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BDE01516
NSN: 5315-00-941-9428
FSC: 5315
CAGE: 12027 — KLINE MANUFACTURING CO INC (USA)
SPECIFICATIONS
height0.281 INCHES NOMINAL IN
diameter0.312 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT FILLISTER
chamfer_length0.062 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle30.0 DEGREES NOMINAL
pin_head_diameter0.625 INCHES NOMINAL IN
under_head_length0.344 INCHES NOMINAL IN
NSN5315-00-941-9428
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BDE01516 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
HEIGHT: 0.281 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 30.0 DEGREES NOMINAL
•
HEAD STYLE: FLAT FILLISTER
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTRAIGHT
CHAMFER LENGTH0.062 INCHES NOMINAL IN
HEIGHT0.281 INCHES NOMINAL IN
PIN CHAMFER ANGLE30.0 DEGREES NOMINAL
HEAD STYLEFLAT FILLISTER
DIAMETER0.312 INCHES NOMINAL IN
PIN HEAD DIAMETER0.625 INCHES NOMINAL IN
UNDER HEAD LENGTH0.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
353243Interchangeable
interchangeable cross-reference
interchangeable
353403Interchangeable
interchangeable cross-reference
interchangeable
01516Interchangeable
interchangeable cross-reference
interchangeable
P00954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BDE01516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BDE01516?
BDE01516 is a PIN,STRAIGHT,HEADED.
What parts can replace BDE01516?
There are 4 known substitutes for BDE01516: 353243, 353403, 01516 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BDE01516?
BDE01516 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-941-9428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BDE01516

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026