PartsTable
Technical Data Sheet
Download PDF

BCH463N24 — CHANNEL,GANG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BCH463N24: CHANNEL,GANG.

The CHANNEL,GANG is a the manufacturer industrial component. Key specifications include material: ALUMINUM, overall_width: 0.452 INCHES MAXIMUM IN, overall_height: 0.250 INCHES MAXIMUM IN, overall_length: 72.00 INCHES NOMINAL IN, surface_treatment: ANODIZE AND PRIMER, end_item_identification: A10. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-658-6778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BCH463N24
NSN: 5340-01-658-6778
FSC: 5340 — Hardware, Commercial
CAGE: 27238 — BRISTOL INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialALUMINUM
overall_width0.452 INCHES MAXIMUM IN
overall_height0.250 INCHES MAXIMUM IN
overall_length72.00 INCHES NOMINAL IN
surface_treatmentANODIZE AND PRIMER
end_item_identificationA10
specification/standard_data76301-3-463THRU465 MANUFACTURERS STANDARD
part_name_assigned_by_controlling_agencyGANG CHANNEL
NSN5340-01-658-6778
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BCH463N24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 76301-3-463THRU465 MANUFACTURERS STANDARD
•
SURFACE TREATMENT: ANODIZE AND PRIMER
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES MAXIMUM IN
OVERALL LENGTH72.00 INCHES NOMINAL IN
OVERALL WIDTH0.452 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA76301-3-463THRU465 MANUFACTURERS STANDARD
SPECIAL FEATURESALUMINUM 7075-T6 ALCLAD PER AMS-QQ-A-250/13 OR 7075-T6 PER AMS-QQ-A-250/12;ANODIZE PER MIL-A-8625,TYPE II,CLASS 1 OR CONVERSION COAT FOR ALCLAD MATERIAL PER MIL-DTL-5541;PRIMER IAW MIL-PRF-23377,TYPE I,CLASS C1 OR C2 AND APPLIED PER MIL-STD-7179;HOLE SPACING FOR NUTS IS EVERY 3 INCHES ALONG CHANNEL IN
SURFACE TREATMENTANODIZE AND PRIMER
PART NAME ASSIGNED BY CONTROLLING AGENCYGANG CHANNEL
END ITEM IDENTIFICATIONA10
MATERIALALUMINUM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
CN170-3-24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CH49686-3-24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BCH463N24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BCH463N24?
BCH463N24 is a CHANNEL,GANG.
What parts can replace BCH463N24?
There are 2 known substitutes for BCH463N24: CN170-3-24, CH49686-3-24. Substitute compatibility should be verified for your specific system.
What is the NSN for BCH463N24?
BCH463N24 is cataloged in the U.S. Government catalog under NSN 5340-01-658-6778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BCH463N24