PartsTable
Technical Data Sheet
Download PDF

BC4W10ANG3 — BEARING,BALL,BELL CRANK

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

BC4W10ANG3: BEARING,BALL,BELL CRANK.

The BEARING,BALL,BELL CRANK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SHIELD, flange_width: 0.0620 INCHES NOMINAL IN, bore_diameter: 0.2500 INCHES NOMINAL IN, inner_ring_width: 0.6250 INCHES NOMINAL IN, outer_ring_width: 0.4370 INCHES NOMINAL IN, special_features: STEEL HOUSING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-0348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BC4W10ANG3
NSN: 3110-00-198-0348
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SHIELD
flange_width0.0620 INCHES NOMINAL IN
bore_diameter0.2500 INCHES NOMINAL IN
shield_quantity2
inner_ring_width0.6250 INCHES NOMINAL IN
outer_ring_width0.4370 INCHES NOMINAL IN
special_featuresSTEEL HOUSING
style_designatorDOUBLE ROW BALL, DOUBLE CLOSURE, RIGID INNER RING EXTENDED BOTH SIDES
surface_treatmentCADMIUM OVERALL
rivet_hole_diameter0.1410 INCHES NOMINAL IN
rivet_hole_quantity12
lubrication_materialGREASE
NSN3110-00-198-0348
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BC4W10ANG3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4370 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
RIVET HOLE QUANTITY: 12
•
STYLE DESIGNATOR: DOUBLE ROW BALL, DOUBLE CLOSURE, RIGID INNER RING EXTENDED BOTH SIDES
•
DISTANCE BETWEEN FLANGE HOLE CENTERS: 1.3130 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4370 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
SHIELD QUANTITY2
RIVET HOLE QUANTITY12
STYLE DESIGNATORDOUBLE ROW BALL, DOUBLE CLOSURE, RIGID INNER RING EXTENDED BOTH SIDES
DISTANCE BETWEEN FLANGE HOLE CENTERS1.3130 INCHES NOMINAL IN
SPECIAL FEATURESSTEEL HOUSING
SURFACE TREATMENTCADMIUM OVERALL
FLANGE WIDTH0.0620 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
BC4W10FS160Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy BC4W10ANG3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BC4W10ANG3?
BC4W10ANG3 is a BEARING,BALL,BELL CRANK.
What parts can replace BC4W10ANG3?
There is 1 known substitute for BC4W10ANG3: BC4W10FS160. Substitute compatibility should be verified for your specific system.
What is the NSN for BC4W10ANG3?
BC4W10ANG3 is cataloged in the U.S. Government catalog under NSN 3110-00-198-0348. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BC4W10ANG3