PartsTable
Technical Data Sheet
Download PDF

BC1264-420-2 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BC1264-420-2: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 BAND, overall_width: 0.625 INCHES NOMINAL IN, special_features: INCLUDES TWO STUD ASSEMBLIES P/N AN3C7A, style_designator: T-BOLT, material_thickness: 0.020 INCHES MINIMUM IN, loop_inside_diameter: 4.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-448-0514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BC1264-420-2
NSN: 5340-01-448-0514
FSC: 5340 — Hardware, Commercial
CAGE: 14242 — VOSS INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 304 BAND
overall_width0.625 INCHES NOMINAL IN
special_featuresINCLUDES TWO STUD ASSEMBLIES P/N AN3C7A
style_designatorT-BOLT
material_thickness0.020 INCHES MINIMUM IN
loop_inside_diameter4.000 INCHES NOMINAL IN
NSN5340-01-448-0514
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BC1264-420-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM IN
•
MATERIAL: STEEL COMP 304 BAND
•
LOOP INSIDE DIAMETER: 4.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES MINIMUM IN
SPECIAL FEATURESINCLUDES TWO STUD ASSEMBLIES P/N AN3C7A
MATERIALSTEEL COMP 304 BAND
LOOP INSIDE DIAMETER4.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
KC4968-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BC1264-420-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BC1264-420-2?
BC1264-420-2 is a CLAMP,LOOP.
What parts can replace BC1264-420-2?
There is 1 known substitute for BC1264-420-2: KC4968-1. Substitute compatibility should be verified for your specific system.
What is the NSN for BC1264-420-2?
BC1264-420-2 is cataloged in the U.S. Government catalog under NSN 5340-01-448-0514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BC1264-420-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.