PartsTable
Technical Data Sheet
Download PDF

BBNX1C1 — NUT,PLAIN,SQUARE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BBNX1C1: NUT,PLAIN,SQUARE.

The NUT,PLAIN,SQUARE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SQUARE, nut_height: 0.310 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-012-0374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BBNX1C1
NSN: 5310-00-012-0374
FSC: 5310 — Nuts and Washers
CAGE: 00000
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSQUARE
nut_height0.310 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_across_flats0.606 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch16
NSN5310-00-012-0374
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BBNX1C1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.606 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.310 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
NUT STYLE: SQUARE
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.606 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.310 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NUT STYLESQUARE
THREAD CLASS2B
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
120374Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFB571TYPEB1CLASSCReference document
Same NSN cross-reference
Reference document — Identification reference
SN38Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy BBNX1C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BBNX1C1?
BBNX1C1 is a NUT,PLAIN,SQUARE.
What parts can replace BBNX1C1?
There are 3 known substitutes for BBNX1C1: 120374, FFB571TYPEB1CLASSC, SN38. Substitute compatibility should be verified for your specific system.
What is the NSN for BBNX1C1?
BBNX1C1 is cataloged in the U.S. Government catalog under NSN 5310-00-012-0374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BBNX1C1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.