PartsTable
Technical Data Sheet
Download PDF

BB29112 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

BB29112: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213 OVERALL, head_style: HEADLESS (SETSCREW), point_style: CHAMFER DOG, point_length: 0.438 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.375 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-207-4380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BB29112
NSN: 5305-00-207-4380
FSC: 5305 — Screws
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1213 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleCHAMFER DOG
point_length0.438 INCHES NOMINAL IN
thread_class3A A
thread_length0.375 INCHES MINIMUM IN
point_diameter0.242 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
fastener_length0.812 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
point_chamfer_angle90.0 DEGREES NOMINAL
NSN5305-00-207-4380
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: BB29112 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 0.242 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
•
POINT LENGTH: 0.438 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.812 INCHES NOMINAL IN
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
POINT CHAMFER ANGLE: 90.0 DEGREES NOMINAL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
POINT DIAMETER0.242 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
POINT LENGTH0.438 INCHES NOMINAL IN
FASTENER LENGTH0.812 INCHES NOMINAL IN
THREAD LENGTH0.375 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
POINT CHAMFER ANGLE90.0 DEGREES NOMINAL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 2
365495Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
10WCV13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy BB29112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BB29112?
BB29112 is a SETSCREW.
What parts can replace BB29112?
There are 2 known substitutes for BB29112: 365495, 10WCV13. Substitute compatibility should be verified for your specific system.
What is the NSN for BB29112?
BB29112 is cataloged in the U.S. Government catalog under NSN 5305-00-207-4380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BB29112

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.