BACW10DM8P: WASHER,FINISHING.
The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include recess_angle: 99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM, hole_diameter: 0.267 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN, overall_height: 0.063 INCHES NOMINAL IN, recess_diameter: 0.399 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, outside_diameter: 0.645 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN, style_designator: FINISHING. This part is cataloged in the U.S.
Government catalog under NSN 5310-01-435-9137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL |
| recess_angle | 99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM |
| hole_diameter | 0.267 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN |
| overall_height | 0.063 INCHES NOMINAL IN |
| recess_diameter | 0.399 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN |
| outside_diameter | 0.645 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN |
| style_designator | FINISHING |
| surface_treatment | CADMIUM AND CHROMATE OVERALL |
| material_thickness | 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN |
| material_document_and_classification | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| surface_treatment_document_and_classification | QQ-P-416, TY 2, CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| NSN | 5310-01-435-9137 |
| OVERALL HEIGHT | 0.063 INCHES NOMINAL IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY 2, CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | FINISHING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| OUTSIDE DIAMETER | 0.645 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN |
| MATERIAL THICKNESS | 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN |
| RECESS DIAMETER | 0.399 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| MATERIAL | STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL |
| HOLE DIAMETER | 0.267 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.