PartsTable
Technical Data Sheet
Download PDF

BACW10DM6P — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACW10DM6P: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.222 INCHES NOMINAL IN, overall_height: 0.048 INCHES NOMINAL IN, major_thickness: 0.016 INCHES NOMINAL IN, outside_diameter: 0.490 INCHES NOMINAL IN, special_features: 100DEG DIMPLED, CRES, FOR REDUCED SHEAR-HEAD BOLT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-593-6758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACW10DM6P
NSN: 5310-01-593-6758
NIINs: 015936758, 016696950
FSC: 5310 — Nuts and Washers
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.222 INCHES NOMINAL IN
overall_height0.048 INCHES NOMINAL IN
major_thickness0.016 INCHES NOMINAL IN
outside_diameter0.490 INCHES NOMINAL IN
special_features100DEG DIMPLED, CRES, FOR REDUCED SHEAR-HEAD BOLT
surface_treatmentCADMIUM OVERALL
end_item_identificationKC-46 AIRCRAFT
part_name_assigned_by_controlling_agencyWASHER
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5310-01-593-6758
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACW10DM6P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.490 INCHES NOMINAL IN
•
MAJOR THICKNESS: 0.016 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.222 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.048 INCHES NOMINAL IN
OUTSIDE DIAMETER0.490 INCHES NOMINAL IN
MAJOR THICKNESS0.016 INCHES NOMINAL IN
SPECIAL FEATURES100DEG DIMPLED, CRES, FOR REDUCED SHEAR-HEAD BOLT
SURFACE TREATMENTCADMIUM OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.222 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
NTA11559-6PSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy BACW10DM6P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACW10DM6P?
BACW10DM6P is a WASHER,FINISHING.
What parts can replace BACW10DM6P?
There is 1 known substitute for BACW10DM6P: NTA11559-6P. Substitute compatibility should be verified for your specific system.
What is the NSN for BACW10DM6P?
BACW10DM6P is cataloged in the U.S. Government catalog under NSN 5310-01-593-6758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACW10DM6P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.