PartsTable
Technical Data Sheet
Download PDF

BACW10A23 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACW10A23: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 OVERALL, hole_diameter: 0.198 INCHES MINIMUM AND 0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM0.209 INCHES MAXIMUM IN, overall_height: 0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM0.080 INCHES MAXIMUM IN, outside_diameter: 0.360 INCHES MINIMUM AND 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.010 INCHES NOMINAL0.010 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-039-7577, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACW10A23
NSN: 5310-01-039-7577
FSC: 5310 — Nuts and Washers
CAGE: 34336 — TECT HYPERVELOCITY, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OVERALL
hole_diameter0.198 INCHES MINIMUM AND 0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM0.209 INCHES MAXIMUM IN
overall_height0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM0.080 INCHES MAXIMUM IN
outside_diameter0.360 INCHES MINIMUM AND 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.010 INCHES NOMINAL0.010 INCHES NOMINAL IN
specification/standard_data81205-BACW10AZ MANUFACTURERS STANDARD
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-039-7577
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACW10A23 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.360 INCHES MINIMUM AND 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL0.010 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81205-BACW10AZ MANUFACTURERS STANDARD
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL COMP 1050 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM0.080 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.360 INCHES MINIMUM AND 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
MATERIAL THICKNESS0.010 INCHES NOMINAL0.010 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81205-BACW10AZ MANUFACTURERS STANDARD
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL COMP 1050 OVERALL
HOLE DIAMETER0.198 INCHES MINIMUM AND 0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM0.209 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
BACW10AZ3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy BACW10A23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACW10A23?
BACW10A23 is a WASHER,SPRING TENSION.
What parts can replace BACW10A23?
There is 1 known substitute for BACW10A23: BACW10AZ3. Substitute compatibility should be verified for your specific system.
What is the NSN for BACW10A23?
BACW10A23 is cataloged in the U.S. Government catalog under NSN 5310-01-039-7577. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACW10A23

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.