PartsTable
Technical Data Sheet
Download PDF

BACS13AP6 — SLEEVE,CLINCH,TUBE FITTING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

BACS13AP6: SLEEVE,CLINCH,TUBE FITTING.

The SLEEVE,CLINCH,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: STEEL, flange_width: 0.060 INCHES MINIMUM IN, overall_length: 0.660 INCHES NOMINAL IN, style_designator: FLARELESS, seat_angle_in_deg: 35.0, surface_treatment: CADMIUM. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-120-8710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACS13AP6
NSN: 4730-01-120-8710
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL
flange_width0.060 INCHES MINIMUM IN
overall_length0.660 INCHES NOMINAL IN
style_designatorFLARELESS
seat_angle_in_deg35.0
surface_treatmentCADMIUM
casehardening_indicatorNOT CASEHARDENED
flange_outside_diameter0.484 INCHES NOMINAL IN
sleeve_outside_diameter0.435 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
hose/tube_outside_diameter_for_which_designed0.375 INCHES NOMINAL IN
NSN4730-01-120-8710
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: BACS13AP6 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAT ANGLE IN DEG: 35.0
•
STYLE DESIGNATOR: FLARELESS
•
SLEEVE OUTSIDE DIAMETER: 0.435 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: CADMIUM
•
FLANGE WIDTH: 0.060 INCHES MINIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SEAT ANGLE IN DEG35.0
STYLE DESIGNATORFLARELESS
OVERALL LENGTH0.660 INCHES NOMINAL IN
SLEEVE OUTSIDE DIAMETER0.435 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTCADMIUM
FLANGE WIDTH0.060 INCHES MINIMUM IN
MATERIALSTEEL
FLANGE OUTSIDE DIAMETER0.484 INCHES NOMINAL IN
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
BACS13APReference document
Same NSN cross-reference
Reference document — Drawing number reference only
DB0S13AP-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACS13AP6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACS13AP6?
BACS13AP6 is a SLEEVE,CLINCH,TUBE FITTING.
What parts can replace BACS13AP6?
There are 2 known substitutes for BACS13AP6: BACS13AP, DB0S13AP-6. Substitute compatibility should be verified for your specific system.
What is the NSN for BACS13AP6?
BACS13AP6 is cataloged in the U.S. Government catalog under NSN 4730-01-120-8710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACS13AP6