BACR15DP6D12: RIVET,SOLID.
The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2017 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: STRAIGHT W/RADIUS CHAMFERED TIP, heat_treatment: T-4 SOLUTION HEAT TREATED OVERALL, shank_diameter: 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, shear_strength: 33000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-230-8835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 2017 OVERALL |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| shank_style | STRAIGHT W/RADIUS CHAMFERED TIP |
| heat_treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| shank_diameter | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| shear_strength | 33000 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN |
| countersink_angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| surface_treatment | ANODIZE OVERALL |
| head_major_diameter | 0.357 INCHES MAXIMUM IN |
| identification_code_color | BLUE |
| material_document_and_classification | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| NSN | 5320-01-230-8835 |
| SHANK DIAMETER | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN |
| IDENTIFICATION CODE COLOR | BLUE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SURFACE TREATMENT | ANODIZE OVERALL |
| COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
No substitute or cross-reference records for this part.