PartsTable
Technical Data Sheet
Download PDF

BACR10Y24D — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BACR10Y24D: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230, overall_length: 4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN, surface_treatment: ANODIZE OR CHROMATE, material_thickness: 0.064 INCHES NOMINAL IN, mounting_hole_diameter: 0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN, width_between_cup_flats: 1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-050-7033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACR10Y24D
NSN: 5340-01-050-7033
FSC: 5340 — Hardware, Commercial
CAGE: 17765 — THE BOEING COMPANY DIV COMMERCIAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230
overall_length4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
surface_treatmentANODIZE OR CHROMATE
material_thickness0.064 INCHES NOMINAL IN
mounting_hole_diameter0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
width_between_cup_flats1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5, ALLOY ALCLAD 2024, T3 FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE
center_to_center_distance_between_cup_and_mounting_hole1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
NSN5340-01-050-7033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACR10Y24D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5, ALLOY ALCLAD 2024, T3 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OR CHROMATE
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5, ALLOY ALCLAD 2024, T3 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
OVERALL LENGTH4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OR CHROMATE
MATERIALALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230
WIDTH BETWEEN CUP FLATS1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACR10Y24D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACR10Y24D?
BACR10Y24D is a RETAINER,NUT AND BOLT.
What is the NSN for BACR10Y24D?
BACR10Y24D is cataloged in the U.S. Government catalog under NSN 5340-01-050-7033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACR10Y24D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.