The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 OR STEEL COMP 4130, overall_width: 0.800 INCHES MAXIMUM IN, overall_height: 0.235 INCHES MAXIMUM IN, overall_length: 1.300 INCHES MAXIMUM IN, style_designator: ANCHOR, surface_treatment: CADMIUM AND CHROMATE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-303-1067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
BACR10AJ6
NSN:5340-01-303-1067 FSC:5340 — Hardware, Commercial CAGE:81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
STEEL COMP 1050 OR STEEL COMP 4130
overall_width
0.800 INCHES MAXIMUM IN
overall_height
0.235 INCHES MAXIMUM IN
overall_length
1.300 INCHES MAXIMUM IN
style_designator
ANCHOR
surface_treatment
CADMIUM AND CHROMATE
material_thickness
0.047 INCHES MAXIMUM IN
mounting_hole_diameter
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
width_between_cup_flats
0.439 INCHES MINIMUM AND 0.449 INCHES MAXIMUM IN
material_document_and_classification
AMS 5085 ASSN STD 1ST MATERIAL RESPONSE AND AMS 6350, COMP 4130 ASSN STD 2ND MATERIAL RESPONSE
distance_between_mounting_hole_centers
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
surface_treatment_document_and_classification
QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
NSN
5340-01-303-1067
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5085 ASSN STD 1ST MATERIAL RESPONSE AND AMS 6350, COMP 4130 ASSN STD 2ND MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.235 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
DISTANCE BETWEEN MOUNTING HOLE CENTERS
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
STYLE DESIGNATOR
ANCHOR
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5085 ASSN STD 1ST MATERIAL RESPONSE AND AMS 6350, COMP 4130 ASSN STD 2ND MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
OVERALL LENGTH
1.300 INCHES MAXIMUM IN
OVERALL WIDTH
0.800 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.047 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACR10AJ6?
BACR10AJ6 is a RETAINER,NUT AND BOLT.
What parts can replace BACR10AJ6?
There are 2 known substitutes for BACR10AJ6: BRR25006, NS202742-6. Substitute compatibility should be verified for your specific system.
What is the NSN for BACR10AJ6?
BACR10AJ6 is cataloged in the U.S. Government catalog under NSN 5340-01-303-1067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.