PartsTable
Technical Data Sheet
Download PDF

BACP20BA1 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BACP20BA1: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: RUBBER, design_type: FRICTION, overall_diameter: 3.000 INCHES NOMINAL IN, features_provided: BEVELED SEAT AND SHOULDER, end_item_identification: KC-46 AIRCRAFT, material_document_and_classification: CAGE 95272, BMS 1-33, GRADE 60 MFR REF SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-206-5776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACP20BA1
NSN: 5340-01-206-5776
NIINs: 012065776, 016694206
FSC: 5340 — Hardware, Commercial
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialRUBBER
design_typeFRICTION
overall_diameter3.000 INCHES NOMINAL IN
features_providedBEVELED SEAT AND SHOULDER
end_item_identificationKC-46 AIRCRAFT
material_document_and_classificationCAGE 95272, BMS 1-33, GRADE 60 MFR REF SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5340-01-206-5776
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACP20BA1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 3.000 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: CAGE 95272, BMS 1-33, GRADE 60 MFR REF SINGLE MATERIAL RESPONSE
•
FEATURES PROVIDED: BEVELED SEAT AND SHOULDER
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER3.000 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONCAGE 95272, BMS 1-33, GRADE 60 MFR REF SINGLE MATERIAL RESPONSE
FEATURES PROVIDEDBEVELED SEAT AND SHOULDER
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 1
N-2088Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACP20BA1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACP20BA1?
BACP20BA1 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace BACP20BA1?
There is 1 known substitute for BACP20BA1: N-2088. Substitute compatibility should be verified for your specific system.
What is the NSN for BACP20BA1?
BACP20BA1 is cataloged in the U.S. Government catalog under NSN 5340-01-206-5776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACP20BA1