BACN10YD2: NUT,CLIP-ON.
The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_style: FLOATINGFLOATING, lubrication: DRY FILM LUBRICANTDRY FILM LUBRICANT, thread_class: 3B3B, overall_width: 0.427 INCHES MINIMUM AND 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM0.447 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.
Government catalog under NSN 5310-01-374-1540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL NUT |
| nut_style | FLOATINGFLOATING |
| lubrication | DRY FILM LUBRICANTDRY FILM LUBRICANT |
| thread_class | 3B3B |
| overall_width | 0.427 INCHES MINIMUM AND 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM0.447 INCHES MAXIMUM IN |
| thread_series | UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF) |
| hardness_rating | 48.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM51.0 ROCKWELL C MAXIMUM |
| locking_feature | PREVAILING TORQUE WITH NONMETALLIC INSERTPREVAILING TORQUE WITH NONMETALLIC INSERT |
| panel_thickness | 0.090 INCHES MINIMUM0.090 INCHES MINIMUM IN |
| thread_direction | RIGHT-HANDRIGHT-HAND |
| surface_treatment | CADMIUM CLIP |
| nominal_thread_size | 0.190 INCHES0.190 INCHES IN |
| NSN | 5310-01-374-1540 |
| LUBRICATION | DRY FILM LUBRICANTDRY FILM LUBRICANT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY II,CL 1 FED SPEC SINGLE TREATMENT RESPONSE CLIP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY II,CL2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF) |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM51.0 ROCKWELL C MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.650 INCHES MINIMUM AND 0.650 INCHES MINIMUM AND 0.680 INCHES MAXIMUM0.680 INCHES MAXIMUM IN |
| OVERALL WIDTH | 0.427 INCHES MINIMUM AND 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM0.447 INCHES MAXIMUM IN |
| THREAD DIRECTION | RIGHT-HANDRIGHT-HAND |
| PANEL THICKNESS | 0.090 INCHES MINIMUM0.090 INCHES MINIMUM IN |
| NOMINAL THREAD SIZE | 0.190 INCHES0.190 INCHES IN |
No substitute or cross-reference records for this part.