PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BACN10YD-3
BACN10YD-3 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: PLASTIC ACETAL LOCKING INSERT, nut_style: FLOATINGFLOATING, lubrication: DRY FILM LUBRICANTDRY FILM LUBRICANT, thread_class: 3B3B, overall_width: 0.427 INCHES MINIMUM AND 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM0.447 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-230-4832, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACN10YD-3
NSN: 5310-01-230-4832
FSC: 5310
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
materialPLASTIC ACETAL LOCKING INSERT
nut_styleFLOATINGFLOATING
lubricationDRY FILM LUBRICANTDRY FILM LUBRICANT
thread_class3B3B
overall_width0.427 INCHES MINIMUM AND 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM0.447 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating48.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM51.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERTPREVAILING TORQUE WITH NONMETALLIC INSERT
panel_thickness0.155 INCHES MINIMUM0.155 INCHES MINIMUM IN
thread_directionRIGHT-HANDRIGHT-HAND
surface_treatmentCADMIUM NUT
nominal_thread_size0.190 INCHES0.190 INCHES IN
NSN5310-01-230-4832
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACN10YD-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PANEL THICKNESS: 0.155 INCHES MINIMUM0.155 INCHES MINIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERTPREVAILING TORQUE WITH NONMETALLIC INSERT
•
SURFACE TREATMENT: CADMIUM NUT
•
MATERIAL: STEEL COMP 1050 CLIP
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.427 INCHES MINIMUM AND 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM0.447 INCHES MAXIMUM IN
PANEL THICKNESS0.155 INCHES MINIMUM0.155 INCHES MINIMUM IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERTPREVAILING TORQUE WITH NONMETALLIC INSERT
SURFACE TREATMENTCADMIUM NUT
MATERIALSTEEL COMP 1050 CLIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
MATERIALPLASTIC ACETAL LOCKING INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY II,CL 1 FED SPEC SINGLE TREATMENT RESPONSE CLIP
SURFACE TREATMENTCADMIUM CLIP
NUT STYLEFLOATINGFLOATING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
MVERBEInterchangeable
interchangeable cross-reference
interchangeable
130-122Interchangeable
interchangeable cross-reference
interchangeable
PER26Interchangeable
interchangeable cross-reference
interchangeable
FPH20AInterchangeable
interchangeable cross-reference
interchangeable
PF27Interchangeable
interchangeable cross-reference
interchangeable
BACN10YD3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy BACN10YD-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACN10YD-3?
BACN10YD-3 is a NUT,CLIP-ON.
What parts can replace BACN10YD-3?
There are 6 known substitutes for BACN10YD-3: MVERBE, 130-122, PER26 and 3 more. Substitute compatibility should be verified for your specific system.
Is BACN10YD-3 still available?
BACN10YD-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACN10YD-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026