PartsTable
Technical Data Sheet
Download PDF

BACN10TS3-10 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACN10TS3-10: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, nut_style: PLATE, nut_height: 1.370 INCHES MINIMUM AND 1.470 INCHES MAXIMUM IN, nut_length: 1.410 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN, plate_width: 1.440 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-049-4069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACN10TS3-10
NSN: 5310-01-049-4069
FSC: 5310 — Nuts and Washers
CAGE: 17765 — THE BOEING COMPANY DIV COMMERCIAL (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
nut_stylePLATE
nut_height1.370 INCHES MINIMUM AND 1.470 INCHES MAXIMUM IN
nut_length1.410 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
plate_width1.440 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
locking_featurePREVAILING TORQUE WITH METALLIC INSERT
plate_thickness0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
special_features0.063 IN. MIN,0.070 IN. MAX INSPECTION HOLE THROUGH NUT IN
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
NSN5310-01-049-4069
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACN10TS3-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
NUT LENGTH: 1.410 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
•
DISTANCE FROM MOUNTING HOLE CENTER TO BASE: 1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 1.440 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-395,TY1,CLASS 1 FED STD SINGLE MATERIAL RESPONSE OR L-P-395,TY1,CLASS 2 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
NUT LENGTH1.410 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
DISTANCE FROM MOUNTING HOLE CENTER TO BASE1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM IN
THREAD SERIESUNF
PLATE WIDTH1.440 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
DISTANCE FROM BASE TO CENTER OF APERTURE0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-395,TY1,CLASS 1 FED STD SINGLE MATERIAL RESPONSE OR L-P-395,TY1,CLASS 2 FED STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.133 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACN10TS3-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACN10TS3-10?
BACN10TS3-10 is a NUT,SELF-LOCKING,PLATE.
What is the NSN for BACN10TS3-10?
BACN10TS3-10 is cataloged in the U.S. Government catalog under NSN 5310-01-049-4069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACN10TS3-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.