PartsTable
Technical Data Sheet
Download PDF

BACN10MS3-10 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACN10MS3-10: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, nut_style: PLATE, nut_height: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, nut_length: 0.985 INCHES NOMINAL IN, plate_width: 0.396 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-012-3959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACN10MS3-10
NSN: 5310-00-012-3959
FSC: 5310 — Nuts and Washers
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
nut_stylePLATE
nut_height0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
nut_length0.985 INCHES NOMINAL IN
plate_width0.396 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
locking_featurePREVAILING TORQUE WITH METALLIC INSERT
plate_thickness0.060 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentANODIZE OR CHROMATE OVERALL
nominal_thread_size0.190 INCHES IN
NSN5310-00-012-3959
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACN10MS3-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.060 INCHES NOMINAL IN
•
NUT LENGTH: 0.985 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.396 INCHES NOMINAL IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.060 INCHES NOMINAL IN
NUT LENGTH0.985 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
PLATE WIDTH0.396 INCHES NOMINAL IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SPECIFICATION/STANDARD DATA81205-BACN10MS MANUFACTURERS STANDARD
SUBSTITUTES & CROSS-REFERENCES 2
WSI5-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
WS15-10Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACN10MS3-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACN10MS3-10?
BACN10MS3-10 is a NUT,SELF-LOCKING,PLATE.
What parts can replace BACN10MS3-10?
There are 2 known substitutes for BACN10MS3-10: WSI5-10, WS15-10. Substitute compatibility should be verified for your specific system.
What is the NSN for BACN10MS3-10?
BACN10MS3-10 is cataloged in the U.S. Government catalog under NSN 5310-00-012-3959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACN10MS3-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.