PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BACN10FX24

BACN10FX24 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: FLOATINGFLOATING, temp_rating: 450.0 FAHRENHEIT MAXIMUM450.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B3B, overall_width: 0.477 INCHES MAXIMUM0.477 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5310-01-143-7511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACN10FX24
NSN: 5310-01-143-7511
FSC: 5310
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleFLOATINGFLOATING
temp_rating450.0 FAHRENHEIT MAXIMUM450.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B3B
overall_width0.477 INCHES MAXIMUM0.477 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating46.0 ROCKWELL C MAXIMUM46.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGNPREVAILING TORQUE ALL METAL DESIGN
panel_thickness0.080 INCHES MINIMUM0.080 INCHES MINIMUM IN
thread_directionRIGHT-HANDRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.190 INCHES0.190 INCHES IN
NSN5310-01-143-7511
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACN10FX24 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGNPREVAILING TORQUE ALL METAL DESIGN
•
TEMP RATING: 450.0 FAHRENHEIT MAXIMUM450.0 FAHRENHEIT MAXIMUM DEGF
•
NOMINAL THREAD SIZE: 0.190 INCHES0.190 INCHES IN
•
THREAD QUANTITY PER INCH: 3232
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.500 INCHES MINIMUM AND 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM0.530 INCHES MAXIMUM IN
•
PANEL THICKNESS: 0.080 INCHES MINIMUM0.080 INCHES MINIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
TECHNICAL CHARACTERISTICS
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGNPREVAILING TORQUE ALL METAL DESIGN
TEMP RATING450.0 FAHRENHEIT MAXIMUM450.0 FAHRENHEIT MAXIMUM DEGF
NOMINAL THREAD SIZE0.190 INCHES0.190 INCHES IN
THREAD QUANTITY PER INCH3232
OVERALL WIDTH0.477 INCHES MAXIMUM0.477 INCHES MAXIMUM IN
DISTANCE FROM BASE TO CENTER OF APERTURE0.500 INCHES MINIMUM AND 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM0.530 INCHES MAXIMUM IN
PANEL THICKNESS0.080 INCHES MINIMUM0.080 INCHES MINIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
THREAD CLASS3B3B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
13-0064InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
TABB DOUBLE END FLAP KNIFEInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LO3823InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
130064PSInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
505026InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
130064ZN81InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BACN10FX24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACN10FX24?
BACN10FX24 is a NUT,CLIP-ON.
What parts can replace BACN10FX24?
There are 7 known substitutes for BACN10FX24: 13-0064, TABB DOUBLE END FLAP KNIFE, LO3823 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACN10FX24?
BACN10FX24 is cataloged in the Federal Logistics Information System under NSN 5310-01-143-7511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACN10FX24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026